Sigma's replacement spoke magnet fits standard spokes and works with Sigma speed sensors.
Wireless mounting bracket for 2012, 2009 STS & 2006 DTS model computers. Handlebar or stem mount. Compatible models: BC 1106 DTS BC 1606L DTS BC1706HR DTS BC 2006 MHR DTS BC 1009 STS BC 1609 STS BC 8.12 ATS BC 12.12 STS BC 14.12 STS BC 16.12 STS Baseline 1200 plus
The cadence magnet pedal insert is designed for tight installation situations. The principle is simple, yet space-saving: the power magnet attaches to any steel pedal spindle by magnetic force alone. From there, it triggers the cadence transmitter with each crank revolution.
Sigma Sport's Cadence Power Magnet is the correct replacement magnet for any Sigma Sport computer featuring cadence (computers sold separately). It attaches to your crankarm with zip ties and double-sided tape (both included).
Power Spoke magnet for all Sigma computers. Fits round and bladed spokes.
Keep your computer where you can read it with Delta's stem bolt-mounted Computer Caddy. It provides a mounting point for awkward or crowded bars. - Mounts securely using the stem bolt - Adds a space to mount up to two devices - Weight limit of 125g (0.28 pounds) per side
Replacement handlebar/stem mount for wireless CR 2450 computers. Compatible devices: ROX 8.0 ROX 9.0 ROX 8.1 Rox 9.1 BC1909HR BC2209MHR ROX 5.0 ROX 6.0
Cadence sensor kit for Universal bracket only. * Note: mount sold separately
Sigma's universal computer mount features a wired speed sensor, so you can use your Sigma cyclo-computer on a second bike. This kit comes with O-rings and a spoke magnet.
Wire harness and hardware to measure computer data based on the front wheel. - Fits most bars bars (25.0 to 31.8mm), 86cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Compatible with: Protege 5.0, 8.0 and 9.0
Origin-8's Data Station 8 is an affordable computer with all the basic, and some advanced functions to make every ride more fun. It has a large easy-to-read LCD screen and displays all your key ride data, like speed, average speed, speed comparison (to tell if you're traveling slower or faster than your average speed), trip distance, clock and riding time. There's even a handy scan mode that lets you set it to cycle through distance, maximum speed, average speed and time so you can track all four simultaneously. The Data Station runs on one LR43 battery (included) and features auto on/off for low power consumption.
Wire harness and hardware to measure computer data based on the rear wheel - Contains bracket with 130cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Bracket fits most bars (25.4 to 31.8mm) - Compatible with: Protegé 5.0, 8.0 and 9.0 - Ideal for rear wheel indoor bicycle trainers
Protege wire harness and hardware with extra length for use with tandem and recumbent bicycles - Contains bracket with 160cm wire, wheel magnet and zip ties - Brackets fits Standard (25.4-26.0mm) bars - Compatible with: Protegé 5.0, 8.0 and 9.0 - Ideal for long wheelbase recumbent and computer installs on a tandem’s rear bars
Start your engine and see if you can get the holeshot! Sunlite's Speedometer is a nice touch for a classic ride. It works and looks just like a car speedometer.
CatEye's Out Front Bracket frees up your handlebars and positions your favorite CatEye computer just in front of your stem for optimal viewing and accessibility.
- Control Center computer mount for any 31.8mm handlebar - Dual clamps provide superior holding power, excellent for GPS units
The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.
MSW Miniac computers are designed to be installed quickly and give the essential information riders need to best enjoy their trip. - Seven Functions: 12/24-hour clock, current speed, maximum speed, trip time, trip distance, total odometer speed, one-button design - CR2032 battery included - Wire harness included
- Mount kit for Joule, Joule GPS or Joule GPS+. - Can be configured for mounting on handlebars or stem.
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. It works great with computers that use a 1/4-turn twist lock interface.
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.
Enjoy easy viewing on your Sigma Rox 10.0 GPS Unit with this out-front handlebar mount. *Note: Out Front Mount for SIGMA ROX 10.0 GPS ONLY. Will fit 31.8 mm diameter bars only.
With the BC 5.16, you will find the five most important bicycle functions in one small device. Despite the compact size, the display is large and clear. The big easy-to-press button switches between the displays quickly. Bike Functions: - Speed (kph/mph) - Trip distance - Total distance - Ride time clock Features: - Display functions using icons - Predefined tires sizes - Ride time up to 100 h - Adjustable scan mode - Automatic start/stop - Tool-free mounting - Watertight in accordance with IPX8
Planet Bike's Protegé 5.0 is a great, no-nonsense computer. You want to know how fast you’re going, or how far you've ridden, or the time? It’s right there in big, bold numbers. In fact, this clever computer displays 4 readings at once so you have the data you need at a glance. The 5.0 mounts easily on your handlebars.
Use this Sigma docking station to easily download ride data to your computer. The docking station is compatible with Sigma's Rox models 8.0, 9.0, 8.1, and 9.1.
- Contains universal handlebar/stem compatible bracket, sensor and magnet - Compatible with Protege 9.0 wireless computer - Will not convert standard Protege 9.0 to wireless
CatEye's Velo 7 displays your speed, distance, ride time and more on its easy-to-see screen. It's simple to operate and understand, features a large, bright display, and has one large button for changing modes. You'll also love CatEye's tool-free Flex-Tight mount for easy installation and removal.
This Sensor works with the Strada Wireless RD300, Strada Wireless Universal CC-RD310W, Micro Wireless CC-MC200W, Urban Wireless CC-VT240W, and Urban Wireless + CC-VT245W.
A cyclo-computer should be informational, not overwhelming, which sums up CatEye's Velo 8 nicely. It's super simple to operate and understand, features a large easy-to-read display and one large button for changing modes. On top of all the standard functions the Velo 8 has a calorie counter to help you track your energy output.
Page 1 of 4 Next page